Electric tools are indispensable in our daily life. Some DIY enthusiasts have all kinds of electric tools in their homes. Some friends borrow one from their neighbors only after temporary repairs at home. But in fact, the electric tools in our daily life can fully meet the daily use with an electric drill. Believe me, you can see the following eight tricks.

1. The first way is to open a brain hole and a temporary vacuum cleaner. It's not very practical. It's good to open a brain hole for reference. It comes from the user's submission, but it's always a thoughtful idea. You can cut a fan leaf with a broken fan leaf, or you can cut a fan leaf by yourself with a can, stick a screw in the center, clip the screw to the electric drill, and then cut off the bottom cover of the bottle with a plastic bottle of suitable size. On the fan blade, a simple vacuum cleaner will be fine.

2. Quick compasses, family maintenance and production often need to draw circles, compasses, this thing is not very many people have. Take a piece of wire, wrap a pencil around one end, and clamp it on the electric drill. The electric drill is not only clamped on a small section of the electric drill, but also bent. As shown below, it is for center positioning.

Such a compass that draws a circle quickly would be good. It can adjust the size of the circle by bending the middle part of the wire as needed.

3. Kitchen grease cleaning is very annoying, good cleaner also has to work hard, if some aging grease dirt is more headache, use electric drill to save more effort, take the old toothbrush, pinch the toothbrush off, twist a longer tapping wire in the middle of the toothbrush head, and then clip to the electric drill, with this tool even in the ceramic tile seam is easy to clean.

4. Saw the long screw short. Sometimes some screw is too long. It's troublesome to buy it in a hardware store with a short one. It's too hard to use manual sawing. As shown in the following figure, when clamped onto the electric drill, the steel saw can be easily sawed without exertion, and it's very neat. The same way can also saw other things.

5. Electric drill alternating grinding is also an electric tool. If you want to use electric drill to grind something, it's not appropriate. You can also cut a piece of sand paper and glue it on the back, and glue it around the chuck position of the electric drill. A simple electric grinding is available. It is suitable for many applications, such as grinding knives, grinding burrs of wooden ironware and so on.

6. Mixer, take a pair of scissors, clip the scissors head to the electric drill, that is, whether there is a mixer or not, ha ha ha, you think this makes the scissors dirty, but also clean up, nothing more.

You can use three straps, as shown in the figure, in three directions, and stick them to the drill bit, which is a better mixer. In the same way, if you use a chopstick or something clean, it can be used as an egg beater.

7. 1. Use two tricks. When drilling with electric drill, the control depth is also a problem. It is not suitable to drill deeply. When drilling shallowly, it is necessary to stop for a while and try it. It is easy to locate the drilling depth by sticking a piece of tape on the drill bit, instead of stopping all the time to look at it.

Have you ever been puzzled by dust when you hit the top from bottom to top? It feels like swimming in the sand. It's all about feeling and daring not look. It's even more refreshing to have a look at your tears. I don't know how much wronged you are. This problem can be solved with a beverage bottle. Cut the bottom of the bottle and drill through the drill from the bottom center. You don't have to worry about the dust flying. You can also watch the drill to control the accuracy better.

Here are seven tips about the alternative use of electric drills in life. If you say something wrong, please correct it and talk about your other ideas.